PRE STACK DEPTH MIGRATION UNTUK KOREKSI EFEK PULL UP DENGAN MENGGUNAKAN METODE HORIZON BASED DEPTH TOMOGRAPHY PADA LAPANGAN ‘A1 DAN A2’

Authors

  • Attikah Azzahra Universitas Lampung, Indonesia
  • Bagus Sapto Mulyatno Universitas Lampung, Indonesia
  • Bambang Mujihardi Pertamina UTC, Indonesia

DOI:

https://doi.org/10.23960/jge.v4i1.6

Keywords:

Pre stack depth migration, pull-up effect, horizon based depth tomography

Abstract

In the case of seismic data processing with sandstone lithology such as shale and carbonate often get the result of data processing which have pull up effect especially on the time domain migration result. Pre stack depth migration is a processing based on focusing the amplitude according to the actual depth by using the input interval velocity. Migration is performed using kirchhoff pre stack depth migration algorithm. Pre stack depth migration is done with modeling of horizontal based depth tomography method. This method uses residual moveout correction applied along the horizon-picking line. This research uses two field data that is A1 and A2 Field. A1field has characteristics of carbonate rock that produce pull up shaped similar to carbonate layer. A2 field has a pull-up effect that is not very clear but has build up because of the layer above it. Stages performed starting from the processing of pre stack time migration in the form of velocity picking, generate rms velocity and migration time domain. The pre stack depth migration process begins with a velocity transformation with the dix transformation equation to generate interval velocity, migrate Pre stack depth migration, perform horizon interpretations and perform velocity modeling using the horizon based depth tomography method. The iteration is done 4 times and resulted in the final section of pre stack depth migration which has been corrected by pull up effect.

References

Edward, L., E., Nick, J., C., and Jan, D., True Depth Conversion: More Than A Pretty Picture,Scott Pickford, A Core Laboratories Company, Vol.26, No.09.

Fagin, S., 1999, Model-Based Depth Imaging, Course Notes Series, No. 10, Society of Exploration Geophysicists, Tulsa.

Fagin, S., 2000, Model-Based Depth Imaging, Course Notes Series, No. 10, Society of Exploration Geophysicists, Tulsa.

Kosloff, D., Sherwood, J., Koren, Z., Machet, E., dan Falkovitz, Y., 1996, Velocity And Interface Depth Determination By Tomography Of Depth Migrated Gather. Geophysics.

Kosloff, D., 1999, Tomographic Interval Velocity Determination From Prestack Migrated Data. Paradigm Geophysical.

Kusuma, M.I., dan Nafi, A.N., 1986, Prospek Hidrokarbon Formasi Warukin Di Cekungan Barito Kalimantan, Kumpulan Makalah Pertemuan Ilmiah Tahunan XIV IAGI, Jakarta, hal 105-124

Mualimin, Hisan, R.S., Djoko, S.B., Sumahardi, B., 2004,Velocity Model Building Pada Pre Stack Depth Migration; (Pencitraan Pada Struktur Yang Kompleks). Proceding PIT HAGI Ke-29, Yogyakarta

Noble, R., A., Hehu P., dan Charlie Wu, C., H., 1997. Oil Kitchen andPetroleum Bearing Subbasin in Northwest Java Area,IPA Proceedings, 26’ Annual Convention, Jakarta.

Van Bemmelen, R.W., 1949, The Geology of Indonesia, Vol.1A, 2nd, Batavia, Netherland, 732 hal.

Downloads

Published

2020-01-17

How to Cite

Azzahra, A., Mulyatno, B. S., & Mujihardi, B. (2020). PRE STACK DEPTH MIGRATION UNTUK KOREKSI EFEK PULL UP DENGAN MENGGUNAKAN METODE HORIZON BASED DEPTH TOMOGRAPHY PADA LAPANGAN ‘A1 DAN A2’. JGE (Jurnal Geofisika Eksplorasi), 4(1), 46–59. https://doi.org/10.23960/jge.v4i1.6

Issue

Section

Articles

Citation Check

Similar Articles

1 2 3 4 5 6 7 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)